█ Summary：
The machine is used for cleancoating on battery electrode. Coast liquid and scrap material according torequirements of intervals size on the electrode. Install the well slittingelectrode on material scroll. Send to the melt and scraping position after goneby servo motor unwind and rectify and constant tension control actions. Whilescrap material, it will heat that area at the same time along with brush dustand absorb dust function. Use PLC to control, with fault defecting function.The machine is with rational construction and high automaticity.
█ Features：
lTab distance can be adjusted by servo motor (multi-scraping area)
lAdopt imported atomizing valve to control liquid
lTo scrap electrode and remove dust automatically
lWith drying residual solvent function, and intelligent control temperature
lWith visual inspection system to mark poor electrode
lAdopt servo motor drive wind or unwind with auto EPC rectifying system, electrode tension can be adjusted
lParameters of HMl visually
█ TechnicalParameters：
No | Item | Parameter | Unit |
1 | Model | SP-2000/150-R |
|
2 | Electrode Width | 30-150 | mm |
3 | Electrode Length | 300-2000 |
|
4 | Scraping Number of Inside Cell | Standard configuration: 1 pair (customizable with multiple scratch zones) | Pair |
5 |
Rolling-up Alignment Accuracy | ±0.5 | mm |
6 | Diameter of Electrode Roll | ≤Φ650 | mm |
7 | Anode&Cathode Width of Scraping Knife | 10~12 | mm |
8 | Working Precision | Scraping Precision: ±0.3 Alignment Degree of Up & down Scraping: ±0.5 Rewinding Uniformity Degree: ±0.5 | mm |
9 | Speed | 15 | PPM |
10 | Operating Rate | ≥98% |
|
11 | Yield Rate | ≥99% |
|
12 | Weight | 4000 | kg |
13 | Dimension | 4500Lx2600Wx2500H | mm |
Note: The above data is for reference only. Technical happen to change without notice, which is subject to negotiation and contract agreements. |
