█ Summary：
This equipment is used formaking cylindrical battery cell. It can make cylindrical cells like diameter3-8mm (pin cell). To put the electrode, separator, electrode tabs, protectivetape and terminated tape on the feeding shaft artificially. It finishes cellmaking through tab welding, winding, rectifying, protective tape sticking, cellwinding, terminated tape sticking then loading to conveyor automatically.
█ Features：
l Adopt single station winding device to guarantee good alignment.
l Adopt unwinding, process and pre-winding EPC system.
l Adopt automatic segmented tension controlling system.
l Adopt ultrasonic wave welding tab system, with high precision ofwelded tabs.
l With auto replacing anode &cathode and separator functions.
l With separator rolling-up, aluminum foil rolling-up and cooperfoil rolling-up functions.
l Adopt pull-down separator to wind, the upper and lower separatorwith tension controlling system.
█ TechnicalParameters:
No | Item | Technical Parameter | Unit |
1 | Model | LPW-04/25-C |
|
2 | Electrode Width | 15-35 | mm |
3 | Electrode Length | 50-120 | mm |
| 4 | Separator Width | 17-37 | mm |
4 | Cell Diameter |
Φ3-Φ7 | mm |
5 | Winding Alignment Accuracy | ±0.25 | mm |
6 | Speed | ≥18（electrode length 50mm) | PPM |
7 | Operating Rate | 98% |
|
8 | Yeild Rate | 99% |
|
9 | Weight | 4000 | Kg |
10 | Dimension | 3600L*1700W*1800H | mm |
