█ Summary：
This equipment is used for makingcylindrical li-ion battery. To put the separator and welded electrode on thefeeding shaft artificially. Via automatically winding, rectifying andpositioning, it also can finish making cells by winding, adhesive tape stickingand loading to conveyer belt etc.
█ Features：
l Adopt three-station winding device to improve productivity.
l Adopt EPC and rectifying function for S-shaped electrode.
l Automatic segmented tensin controlling system.
l With cleaning and dedusting and removing static functions.
l With central hole adjusting function, easy to connect withconveyor line.
l Defective electrode can be single winded and discharged.
l Use Hit-pot short circuit testing, eliminate the defectives.
l Use the imported PLC controlling system.
l Parameters of HMI visually.
l Real timemonitoring function, alarming automatically.
█ TechnicalParameters：
No | Item | Parameter | Unit |
1 | Model | LWC-18/65-R | LWC-36/120-R |
|
2 | Electrode Width | 40-65 | 10-60 | mm |
3 | Electrode Length | 350-1800 | 120-500 | mm |
4 | Separator Width | 50-70 | 10-62 | mm |
5 | Diameter | Ф14-Ф32 | Ф7-Ф14 | mm |
6 | Needle Diameter | Φ3-Φ4
|
Φ2-Φ4 | mm |
7 | Terminated Tape Width | 20-65 | 10-60 | mm |
8 | Exposed Length of Tabs | 8-25 | 8-30 | mm |
9 | Winding Precision | ±0.3 | ±0.3 | mm |
10 | Speed | ≥32（Electrode length 700mm）
| ≥30（Electrode length 400 mm） | PPM |
11 | Operating Rate | ≥98% |
|
12 | Yield Rate | ≥99% |
|
13 | Weight | 2400 | 2400 | kg |
14 | Dimension | 2800L×1500W×2200H | 2800L×1500W×2200H | mm |
Note: The above data is for reference only. Technical happen to change without notice, which is subject to negotiation and contract agreements. |
