█ Summary：
This equipment is used for winding differentspecifications of cylindrical li-ion battery. Put the anode and cathode andseparator on material shaft, going by tension controlling, dust removing,static eliminating, electrode rectifying and quality monitoring etc. It canenter into winding under the guide roller and electrode sending device tofinish feeding, winding and tape sticking. After finishing the above process,it will take off by manipulator, then go through short circuit testing andphoto electricity counting, delivery products by the conveyor.
█ Features：
l Adopt three-station winding device to improve productivity.
l Anode & cathode and separatorunwinding automatically.
l Adopt EPC and rectifying function for S-shaped electrode.
l Adopt automatic segmented tension controlling system.
l With cleaning and dedusting and removing static functions.
l Automatic feeding mandrel.
l With auto burning separator pre-winding function.
l Use Hit-pot short circuit testing, eliminate the defectives.
l Use imported PLC controlling system.
l Parameters of HMI visually.
l Electrode single windingfunction.
l Real timemonitoring function, alarming automatically.
█ TechnicalParameter：
No | Item | Parameter | Unit |
1 | Model | LWC-60/170-R | LWC-70/260-R |
|
2 | Electrode Width | 80~170 | 120~260 | mm |
3 | Electrode Length | 2500~10000 | 3000~10000 | mm |
4 | Separator Width | 80-170 | 180~260 | mm |
5 | Diameter | Ф30~Ф70 | Ф50~Ф70 | mm |
6 | Mandrel Diameter | Ф8~Ф12 | Ф10~Ф16 | mm |
7 | Terminated Tape Width | 15~40 | 15~40 | mm |
8 | Winding Precision | ±0.5 | ±0.5 | mm |
9 | Speed | ≥5(electrode length 10000mm） | PPM |
10 | Operating Rate | ≥96% |
|
11 | Yield Rate | ≥98% |
|
12 | Weight | 3500 | 4500 | kg |
13 | Dimension | 3650L×2100W×2100H | 3750L×2300W×2100H | mm |
Note: The above data is for reference only. Technical happen to change without notice, which is subject to negotiation and contract agreements. |
