█ Summary：
This equipment is used for makingprismatic li-ion battery cell. To put the separator and welded electrode on thefeeding shaft artificially. Via automatically winding, rectifying andpositioning, it can finish winding, adhesive tape sticking, cold pressing,short circuit testing, loading to conveyer belt etc. It’s stable to makingcells.
█ Features：
l Adopt three-station windingdevice to improve productivity.
l Adopt linear motor to controltension fluctuation within ±5%..
l Adopt EPC and rectifying functionfor S-shaped electrode.
l With auto change electrodefunction.
l With auto change separatorfunction.
l With cleaning and dedusting andremoving static functions.
l With cutting electrode andsticking protective tape function.
l With detecting and automaticeliminating defective electrode function. (line speed over 700mm/s)
l Cutter modular design，easy to operate and maintenance.
l Clamp-on to unload and transfer，no damage to cell.
l The defective cell can beclassified by manipulator.
l Use the imported PLC controllingsystem.
l Use CCD online checking thewinding alignment metric.
l With laser scan code and printcode function, product quality can be traced back to MES system.
l Adopt Enther Cat network systemwith high speed and anti-interference .
█ TechnicalParameters:
No | Item | Parameter | Unit |
1 | Model | LWP-180/220-R |
|
2 | Electrode Width | 70~350 | mm |
3 | Electrode Length | 2000~18000 | mm |
4 | Separator Width | 70~360 | mm |
5 | Cell Width | 10~30 | mm |
6 |
Winding Needle Thickness | 28-50 | mm |
7 | Terminated Adhesive Tape Width | 30~350 | mm |
8 | Exposed Length of Tabs | 5~35 | mm |
9 | Winding Alignment Accuracy | ±0.3 | mm |
10 | Speed | ≥6（electrode length 12000mm） | PPM |
11 | Operating Rate | ≥98% |
|
12 | Yield Rate | ≥99% |
|
13 | Weight | 10500 | kg |
14 | Dimension | 6000L×2500W×2500H | mm |
Note: The above data is for reference only. Technical happen to change without notice, which is subject to negotiation and contract agreements. |
