█ Summary：
This equipment is for makingcylindrical 18650 li-ion battery. To put the material, tube and gasket on thefeeding shaft artificially. The machine can automatically finish a series ofprocess, such as feeding, length cutting, tubing, gasket blanking, positioning,thermal shrinkage and discharging etc, to finish tube sleeving of cell.
█ Features：
l To operate steadily with rotatingmechanism.
l Adopt the cam slicer to drive,position exactly.
l The gasket blanks automatically,tailing is collected to roll.
l With the static removingfunction of feeding gasket device.
l The eccentric wheels position the tubes with accurate diameter.
l Adopt revolution and rotation toensure heat evenly.
l With the imported PLC controllingsystem.
l Adopt several detecting device toavoid getting stuck.
l Adopt the multi-axis drive toprotect the torsion limiter.
█ Technical Parameters:
No | Item | Parameter | Unit |
1 | Model | LTC-18/65-I | LTC-18/65-II |
|
1 | Height | 65±0.3 | 65±0.3 | mm |
2 | Weight | 40±1.0 | 40±1.0 | g |
3 | Diameter | Ф18±0.2 | Ф18±0.2 | mm |
4 | Lay-flat Width of Tube | 29~31 | 29~31 | mm |
5 | Tube Material | PVC or PET | PVC or PET |
|
6 | Tube Thickness | 0.06~0.1 | 0.06~0.1 | mm |
7 | Tube Length Precision | 71±0.3 | 71±0.3 | mm |
8 | Exposed Length of Tube Roof | 2.5±0.5 | 2.5±0.5 | mm |
9 | Exposed Length of Tube Bottom | 2.5±0.5 | 2.5±0.5 | mm |
10 | Gasket Material | PVC or others | PVC or others |
|
11 | Gasket Thickness | 0.2 ±0.05 | 0.2 ±0.05 | mm |
12 | Gasket Width | 20±0.05 | 20±0.05 | mm |
13 | Gasket Inner Diameter | Ф10.5±0.02（Custom-made） | mm |
14 | Gasket Outer Diameter | Ф17.5±0.02（Custom-made） | mm |
15 | Speed | ≥60（Adjustable） | ≥130 | PPM |
16 | Operating Rate | ≥98% | ≥98% |
|
17 | Yield Rate | ≥99.5% | ≥99.5% |
|
18 | Weight | 800 | 800 | kg |
19 | Dimension | 2600LX 1250W X 2000H | mm |
Note: The above data is for reference only. Technical happen to change without notice, which is subject to negotiation and contract agreements. |
